| |
Main
Date: 08 Nov 2006 23:33:57
From: Rex Kerr
Subject: Persuading cities to mark loop detectors
|
I've been going back and forth with both Sacramento county and the city of Rancho Cordova about two different intersections that I encounter frequently requesting that they k the signal detectors so that I can trigger the lights. Unfortunately I keep getting responses that say something like: "That's a motor vehicle lane, not a bike lane." -- or -- "The kings in the MUTCD (which I sent them links to) are for special bicycle detectors, thus we won't be using them." It's getting quite frustrating actually. I recently sent this response to the city (which is very similar to one that I sent to the county). I'd appreciate any feedback or pointers on how to convince them to work with me... again, I've already sent links to the DOT website & the DMV website. --- quoted e-mail --- Thank you for the reply. The city of Chico, CA (where I moved here from about a year ago) had kings at the most sensitive location of almost all of the signal detector loops within the city limits. These were not specialized bicycle detectors, but rather they ked the location of the edge of the loop where they would detect a bicycle. If the detector loop is visible (in other words, it was installed after the pavement was laid and the cuts are visible) I can always trigger the loop successfully by knowing where to place my bicycle. When I contacted the city of Folsom about a detector loop that was paved over they went out and ked its location the very same day, and I have had 100% success using the standard detector. Also, notice that this publication from the CA DOT: http://www.dot.ca.gov/hq/tpp/offices/bike/Bike_Bklt_3-03_view.pdf ...mentions that the city of Cupertino has used the standard symbol to k their signal detectors. It makes no mention of these being special bicycle detectors, rather from the context it is quite clear that they are writing about standard vehicle detectors. Unfortunately your comment that the city plans to paint bicycle lanes is not a sufficient concession for cyclists. Bicycle lanes present numerous problems for cyclists, the biggest being that they encourage dangerous lane positioning and dangerous interaction at intersections. That issue aside, the bicycle lane would not address my concern about the signal detectors. I noticed that special buttons have been placed at the edge of the sidewalk at the intersection of Kilgore and Trade Center. This seems to me to be a very expensive yet ineffective attempt to address the problem. These buttons encourage cyclists traveling straight to stop at the button. This position is dangerous because right turning vehicles will try to squeeze the cyclist and turn right in front of them. Instead the cyclists is supposed to be positioned much like a motor vehicle allowing right turning motorists to pass to the right of them. A standardized king (which many cities HAVE adopted) on the standard detector encourages a much safer lane position. Moreover, the button does NOT address the concern of left turning cyclists. How exactly are we supposed to make left turns? According to the DMV's website: http://www.dmv.ca.gov/pubs/hdbk/pgs55thru57.htm Bicyclists: * must ride in the same direction as other traffic, not against it. * must ride in a straight line as near to the right curb or edge of the roadway as practical- not on the sidewalk. * (MADE BOLD AND RED) must make left and right turns in the same way that drivers do, using the same turn lanes. * may legally move left to turn left, to pass a parked or moving vehicle, another bicycle, an animal, or to make a turn, avoid debris, or other hazards. * may choose to ride near the left curb or edge of a one-way street. * (MADE BOLD AND RED) may use a left turn lane. (MADE BOLD AND GREEN) If the bicyclist is traveling straight ahead, he or she should use a through traffic lane rather than ride next to the curb and block traffic making right turns. * are lawfully permitted to ride on certain sections of freeways, when signs are posted. Be careful when approaching or passing a bicyclist on a freeway. Notice that both of my statements are backed up by this quote! I hope that you will take the time to research the concerns of cyclists, look into how cyclists are supposed to interact with other traffic (the DMV's driver's handbook has good information on this), and consider how the lack of proper kings makes doing so nearly impossible. Thank you, -Rex
|
|
| |
Date: 10 Nov 2006 11:35:28
From:
Subject: Re: Persuading cities to mark loop detectors
|
Bill wrote: > Tom Keats wrote: > > In article <1163057637.422723.240180@f16g2000cwb.googlegroups.com>, > > "Rex Kerr" <rexkerr@gmail.com> writes: > >> I've been going back and forth with both Sacramento county and the city > >> of Rancho Cordova about two different intersections that I encounter > >> frequently requesting that they k the signal detectors so that I can > >> trigger the lights. Unfortunately I keep getting responses that say > >> something like: > >> > >> "That's a motor vehicle lane, not a bike lane." > >> -- or -- > >> "The kings in the MUTCD (which I sent them links to) are for special > >> bicycle detectors, thus we won't be using them." > > > > It seems to me that in some if not most jurisdictions, if > > a loop detector doesn't trigger a fresh light cycle, the > > vehicle operator can consider it defective and revert to > > 4-way stop rules, ignoring the light. As I understand it, > > doing so requires waiting a certain duration first. > > > > Perhaps a point can be made in your correspondence, that > > an unked detector might be considered essentially > > defective (or deficient,) and may cause undue delays to > > traffic waiting behind the vehicle (bicycle) trying in > > vain to trigger it? > > > > > > cheers, > > Tom > > > Hah, > I have an old days story about San Jose, Ca. They used to, 'may still' > have metal plate pressure detectors at some of the lights. It was bad > enough that on a motorcycle I had to stop with the front tire on the > plate and on a bicycle sometimes I had to get off and jump on the plate. > That was a hassle. > Bill Baka Or you could have just gained a lot of weight. Joseph
|
| |
Date: 10 Nov 2006 07:05:14
From: Rex Kerr
Subject: Re: Persuading cities to mark loop detectors
|
Tom Keats wrote: > Perhaps a point can be made in your correspondence, that > an unked detector might be considered essentially > defective (or deficient,) and may cause undue delays to > traffic waiting behind the vehicle (bicycle) trying in > vain to trigger it? That's a good point. The intersection for which I wrote to Sac County has caused that because usually the second vehicle is too timid to get close enough to me to trigger the second loop detector and I have waited yet another cycle in frustration until I finally wave them forward (which just gets a baffled look).
|
| | |
Date: 10 Nov 2006 16:13:48
From: Kristian M Zoerhoff
Subject: Re: Persuading cities to mark loop detectors
|
In article <1163171114.483550.12040@h54g2000cwb.googlegroups.com >, rexkerr@gmail.com says... > Tom Keats wrote: > > Perhaps a point can be made in your correspondence, that > > an unked detector might be considered essentially > > defective (or deficient,) and may cause undue delays to > > traffic waiting behind the vehicle (bicycle) trying in > > vain to trigger it? > > That's a good point. The intersection for which I wrote to Sac County > has caused that because usually the second vehicle is too timid to get > close enough to me to trigger the second loop detector and I have > waited yet another cycle in frustration until I finally wave them > forward (which just gets a baffled look). I've occasionally had to do that, but I find that motorists around here (NW Chicago 'burbs) understand the "move up" signal pretty well. Fortunately, I've gotten to the point that I can trigger the loop detectors reliably by lining up along the edge, over the pavement cut (they're pretty much all visible around here). It's the newfangled radar-ish detectors on top of light masts that leave me befuddled now. -- __o Kristian Zoerhoff _'\(,_ kristian.zoerhoff@gmail.com (_)/ (_)
|
| | | |
Date: 11 Nov 2006 04:06:51
From: Claire Petersky
Subject: Re: Persuading cities to mark loop detectors
|
"Kristian M Zoerhoff" <kristian.zoerhoff@gmail.com > wrote in message news:MPG.1fbe6129643d6cb98977e@news.chi.sbcglobal.net... > In article <1163171114.483550.12040@h54g2000cwb.googlegroups.com>, > rexkerr@gmail.com says... >> Tom Keats wrote: >> > Perhaps a point can be made in your correspondence, that >> > an unked detector might be considered essentially >> > defective (or deficient,) and may cause undue delays to >> > traffic waiting behind the vehicle (bicycle) trying in >> > vain to trigger it? >> >> That's a good point. The intersection for which I wrote to Sac County >> has caused that because usually the second vehicle is too timid to get >> close enough to me to trigger the second loop detector and I have >> waited yet another cycle in frustration until I finally wave them >> forward (which just gets a baffled look). > > I've occasionally had to do that, but I find that motorists around here > (NW > Chicago 'burbs) understand the "move up" signal pretty well. Some motorists must believe that one's bicycle is about to explode, and therefore they must maintain a 12 foot distance. Or at least, that's what some motorists' behavior would lead one to assume. Some lady downright REFUSED to get any closer to me at an intersection. Her "politeness" to me meant that the intersection behind her gridlocked. It's so aggrevating when motorists refuse to move closer to you despite you nearly pleading with them to do so. -- Warm Regards, Claire Petersky http://www.bicyclemeditations.org/ See the books I've set free at: http://bookcrossing.com/referral/Cpetersky
|
| |
Date: 10 Nov 2006 00:55:31
From: Tom Keats
Subject: Re: Persuading cities to mark loop detectors
|
In article <1163057637.422723.240180@f16g2000cwb.googlegroups.com >, "Rex Kerr" <rexkerr@gmail.com > writes: > I've been going back and forth with both Sacramento county and the city > of Rancho Cordova about two different intersections that I encounter > frequently requesting that they k the signal detectors so that I can > trigger the lights. Unfortunately I keep getting responses that say > something like: > > "That's a motor vehicle lane, not a bike lane." > -- or -- > "The kings in the MUTCD (which I sent them links to) are for special > bicycle detectors, thus we won't be using them." It seems to me that in some if not most jurisdictions, if a loop detector doesn't trigger a fresh light cycle, the vehicle operator can consider it defective and revert to 4-way stop rules, ignoring the light. As I understand it, doing so requires waiting a certain duration first. Perhaps a point can be made in your correspondence, that an unked detector might be considered essentially defective (or deficient,) and may cause undue delays to traffic waiting behind the vehicle (bicycle) trying in vain to trigger it? cheers, Tom -- -- Nothing is safe from me. Above address is just a spam midden. I'm really at: tkeats [curlicue] vcn [point] bc [point] ca
|
| | |
Date: 10 Nov 2006 17:46:42
From: Bill
Subject: Re: Persuading cities to mark loop detectors
|
Tom Keats wrote: > In article <1163057637.422723.240180@f16g2000cwb.googlegroups.com>, > "Rex Kerr" <rexkerr@gmail.com> writes: >> I've been going back and forth with both Sacramento county and the city >> of Rancho Cordova about two different intersections that I encounter >> frequently requesting that they k the signal detectors so that I can >> trigger the lights. Unfortunately I keep getting responses that say >> something like: >> >> "That's a motor vehicle lane, not a bike lane." >> -- or -- >> "The kings in the MUTCD (which I sent them links to) are for special >> bicycle detectors, thus we won't be using them." > > It seems to me that in some if not most jurisdictions, if > a loop detector doesn't trigger a fresh light cycle, the > vehicle operator can consider it defective and revert to > 4-way stop rules, ignoring the light. As I understand it, > doing so requires waiting a certain duration first. > > Perhaps a point can be made in your correspondence, that > an unked detector might be considered essentially > defective (or deficient,) and may cause undue delays to > traffic waiting behind the vehicle (bicycle) trying in > vain to trigger it? > > > cheers, > Tom > Hah, I have an old days story about San Jose, Ca. They used to, 'may still' have metal plate pressure detectors at some of the lights. It was bad enough that on a motorcycle I had to stop with the front tire on the plate and on a bicycle sometimes I had to get off and jump on the plate. That was a hassle. Bill Baka
|
| |
Date: 09 Nov 2006 19:50:10
From:
Subject: Re: Persuading cities to mark loop detectors
|
Claire Petersky wrote: > "Rex Kerr" <rexkerr@gmail.com> wrote in message > news:1163057637.422723.240180@f16g2000cwb.googlegroups.com... > > I've been going back and forth with both Sacramento county and the city > > of Rancho Cordova about two different intersections that I encounter > > frequently requesting that they k the signal detectors so that I can > > trigger the lights. > > They could talk to the City of Bellevue. Each of our signals is ked with > an X. See: http://www.ci.bellevue.wa.us/transportation_walking.htm Hmm. I see the PDF of the bike map reminds cyclists of only _one_ law. And it's not "ride the same direction as traffic," nor "use lights at night," nor "obey traffic signals" nor... - Frank Krygowski
|
| | |
Date: 11 Nov 2006 11:16:18
From: Solvang Cyclist
Subject: Re: Persuading cities to mark loop detectors
|
frkrygow@gmail.com wrote in news:1163130610.895649.130760 @h48g2000cwc.googlegroups.com: > Hmm. I see the PDF of the bike map reminds cyclists of only _one_ law. > And it's not "ride the same direction as traffic," nor "use lights at > night," nor "obey traffic signals" nor... > > I hope I'm not causing this thread to be hijacked by this tangent, but... Without getting into the merits (or perhaps more appropriately the lack of merits) of this particular law in Bellevue, I think that it's logical to assume that the reason this is the only law noted on the map is because it's the only one that is specific to Bellevue as opposed to the more "universal" vehicle codes for bicycles that you referenced. Cheers, David
|
| |
Date: 09 Nov 2006 12:13:28
From:
Subject: Re: Persuading cities to mark loop detectors
|
jobst.brandt@stanfordalumni.org wrote: > Rex Kerr wrote: > > > I've been going back and forth with both Sacramento county and the > > city of Rancho Cordova about two different intersections that I > > encounter frequently requesting that they k the signal detectors > > so that I can trigger the lights. Unfortunately I keep getting > > responses that say something like: > > > "That's a motor vehicle lane, not a bike lane." > > -- or -- > > "The kings in the MUTCD (which I sent them links to) are for > > special bicycle detectors, thus we won't be using them." > > In contrast, in Palo Alto, where Alma St. merges with El Camino Real, > there is a pedestrian and bicycle crossing (cars cannot cross this > intersection from Alma St.) with a full traffic light and pedestrian > signal. The sages provided a pedestrian button AND a separate bicycle > loop detector. > > A 3x5" sign about 10ft back from the pedestrian button points at the > road and says "Bicycles Stop Here". Bicyclists don't see the sign or > don't trust the detector, so they get up on the sidewalk and press the > pedestrian button (if no pedestrian is there). > > What they don't know is that the detector turns the traffic light > green and leaves the pedestrian signal unaffected. The phase for > bicycle is half as long as the pedestrian phase so that when > bicyclists use the pedestrian button, a six lane road is left Waiting > for Godot" at an empty intersection of Sand Hill Rd. and El Camino > Real. > > All they need is a bicycle button, not a loop, at the post where the > little sign is located. > > Jobst Brandt For some reason this reminds me of a traffic light set-up I saw several places in Italy on a recent trip: A light in the middle of a small town that is connected to radar. A large sign informs drivers that speeders will be presented with a red light. I tested it, and it works. Not only the speeder has to wait, everyone does. Talk about waiting for Godot! Sometimes offering convenience isn't the best solution. I agree that a simple button might be a much better solution, though I have never been there, and I don't belive I have ever ridden a bike on a road with such a system. Joseph
|
| | |
Date: 09 Nov 2006 19:36:16
From: Solvang Cyclist
Subject: Re: Persuading cities to mark loop detectors
|
joseph.santaniello@gmail.com wrote in news:1163103208.509866.304830 @k70g2000cwa.googlegroups.com: > For some reason this reminds me of a traffic light set-up I saw several > places in Italy on a recent trip: A light in the middle of a small town > that is connected to radar. A large sign informs drivers that speeders > will be presented with a red light. No offence intended here, but I don't understand why they would have such a system in Italy of all places. When I drove there (about 15 years ago) it seemed that red lights were only "suggestions" anyway so why would a speeder care at all? <grin > Cheers, David
|
| |
Date: 09 Nov 2006 10:47:54
From: Rex Kerr
Subject: Re: Persuading cities to mark loop detectors
|
> What they don't know is that the detector turns the traffic light > green and leaves the pedestrian signal unaffected. The phase for > bicycle is half as long as the pedestrian phase so that when > bicyclists use the pedestrian button, a six lane road is left Waiting > for Godot" at an empty intersection of Sand Hill Rd. and El Camino > Real. I'm not certain that I fully understand what you were trying to convey, but you did bring up a very good point that I should use in the future. By not supplying a standardized king on the loop detector they are encouraging bicycles to use the pedestrian signal, which unnecessarily delays traffic. I see that happen daily. Then again, it sounds like you might be saying that cyclists won't use the loop detector even if it is ked.
|
| |
Date: 09 Nov 2006 08:52:56
From: Rex Kerr
Subject: Re: Persuading cities to mark loop detectors
|
> They could talk to the City of Bellevue. Each of our signals is ked with > an X. See: http://www.ci.bellevue.wa.us/transportation_walking.htm, and > scroll to "To Activate a Traffic Signal When on a Bike" Kevin's a cool > guy -- his phone number and email are over on the right panel on the > webpage. I bet he'd be willing to help. Email him and see what he says. My last e-mail (the one that I posted) seems to have gotten some attention. Your link came in handy, thanks! BTW, I've ridden in Bellevue. I don't remember the kings then (about 6 years ago), but it's a nice area. I rode from there over to Seattle and back -- of course it was raining. :-) I remember getting lost and finally catching up to a lady who was riding on the trail. As I was trying to explain where I wanted to be (unsuccessfully) we came out near Microsoft's campus and then I knew how to get back to Bellevue. :-)
|
| |
Date: 09 Nov 2006 08:45:32
From: Rex Kerr
Subject: Re: Persuading cities to mark loop detectors
|
> We've got to keep bikes and motor vehicles separated. Actually, from everything I've read, this suggestion is actually much worse. All I'm asking for is kings making it possible for me to share the same facilities. If anything, I much prefer when cities just pave the road wide enough and do NOT k a specific bicycle lane -- I have far fewer negative interactions with vehicles on these roads than those that paint separate facilities. I saw a system of special lights and intersections similar to what you proposed in your message while in London. They looked quite frightful to me! I like our system better, if properly implemented.
|
| |
Date: 09 Nov 2006 16:09:13
From: Grolch
Subject: Re: Persuading cities to mark loop detectors
|
"Rex Kerr" <rexkerr@gmail.com > wrote in message news:1163057637.422723.240180@f16g2000cwb.googlegroups.com... > I've been going back and forth with both Sacramento county and the city > of Rancho Cordova about two different intersections that I encounter > frequently requesting that they k the signal detectors so that I can > trigger the lights. Unfortunately I keep getting responses that say > something like: > > "That's a motor vehicle lane, not a bike lane." > -- or -- > "The kings in the MUTCD (which I sent them links to) are for special > bicycle detectors, thus we won't be using them." > > It's getting quite frustrating actually. I recently sent this response > to the city (which is very similar to one that I sent to the county). > I'd appreciate any feedback or pointers on how to convince them to work > with me... again, I've already sent links to the DOT website & the DMV > website. > > --- quoted e-mail --- > Thank you for the reply. > > The city of Chico, CA (where I moved here from about a year ago) had > kings at the most sensitive location of almost all of the signal > detector loops within the city limits. These were not specialized > bicycle detectors, but rather they ked the location of the edge of > the loop where they would detect a bicycle. If the detector loop is > visible (in other words, it was installed after the pavement was laid > and the cuts are visible) I can always trigger the loop successfully by > knowing where to place my bicycle. When I contacted the city of Folsom > about a detector loop that was paved over they went out and ked its > location the very same day, and I have had 100% success using the > standard detector. Also, notice that this publication from the CA DOT: > > http://www.dot.ca.gov/hq/tpp/offices/bike/Bike_Bklt_3-03_view.pdf > > ...mentions that the city of Cupertino has used the standard symbol to > k their signal detectors. It makes no mention of these being > special bicycle detectors, rather from the context it is quite clear > that they are writing about standard vehicle detectors. > > Unfortunately your comment that the city plans to paint bicycle lanes > is not a sufficient concession for cyclists. Bicycle lanes present > numerous problems for cyclists, the biggest being that they encourage > dangerous lane positioning and dangerous interaction at intersections. > That issue aside, the bicycle lane would not address my concern about > the signal detectors. > > I noticed that special buttons have been placed at the edge of the > sidewalk at the intersection of Kilgore and Trade Center. This seems > to me to be a very expensive yet ineffective attempt to address the > problem. These buttons encourage cyclists traveling straight to stop > at the button. This position is dangerous because right turning > vehicles will try to squeeze the cyclist and turn right in front of > them. Instead the cyclists is supposed to be positioned much like a > motor vehicle allowing right turning motorists to pass to the right of > them. A standardized king (which many cities HAVE adopted) on the > standard detector encourages a much safer lane position. Moreover, > the button does NOT address the concern of left turning cyclists. How > exactly are we supposed to make left turns? According to the DMV's > website: > > > http://www.dmv.ca.gov/pubs/hdbk/pgs55thru57.htm > > Bicyclists: > > * must ride in the same direction as other traffic, not against it. > * must ride in a straight line as near to the right curb or edge of > the roadway as practical- not on the sidewalk. > * (MADE BOLD AND RED) must make left and right turns in the same > way that drivers do, using the same turn lanes. > * may legally move left to turn left, to pass a parked or moving > vehicle, another bicycle, an animal, or to make a turn, avoid debris, > or other hazards. > * may choose to ride near the left curb or edge of a one-way > street. > * (MADE BOLD AND RED) may use a left turn lane. (MADE BOLD AND > GREEN) If the bicyclist is traveling straight ahead, he or she should > use a through traffic lane rather than ride next to the curb and block > traffic making right turns. > * are lawfully permitted to ride on certain sections of freeways, > when signs are posted. Be careful when approaching or passing a > bicyclist on a freeway. > > Notice that both of my statements are backed up by this quote! > > I hope that you will take the time to research the concerns of > cyclists, look into how cyclists are supposed to interact with other > traffic (the DMV's driver's handbook has good information on this), and > consider how the lack of proper kings makes doing so nearly > impossible. > > Thank you, > -Rex Far too often City planners seem to think that putting up a "share the road" sign or painting a few bicycle logos on the pavement is creating a bike lane. Our (anycity, USA {or Canada}) City planners would do well to visit the Netherlands and see what Real bike lanes and paths look like. We've got to keep bikes and motor vehicles separated. How about giving intersection control priority to pedestrians and cyclists as an added incentive to cyclists and disincentive to drivers. Let THEM fume in their two-ton stink boxes I say! Grolsch
|
| | |
Date: 09 Nov 2006 16:36:41
From: Leo Lichtman
Subject: Re: Persuading cities to mark loop detectors
|
The people you have been dealing with don't understand the law. They also don't under stand the legal liability they will face by ignoring you, when eventually, and inevitably, someone is injured or killed because of their ignorant stubbornness, I would make a friendly visit to the city attorney's office and present the same information included in your original post.
|
| |
Date: 09 Nov 2006 07:51:26
From:
Subject: Re: Persuading cities to mark loop detectors
|
Rex Kerr wrote: > I've been going back and forth with both Sacramento county and the city > of Rancho Cordova about two different intersections that I encounter > frequently requesting that they k the signal detectors so that I can > trigger the lights. Unfortunately I keep getting responses that say > something like: > > "That's a motor vehicle lane, not a bike lane." > -- or -- > "The kings in the MUTCD (which I sent them links to) are for special > bicycle detectors, thus we won't be using them." > > It's getting quite frustrating actually. I sympathize. My bike club is having worse problems with a local park district. They have been absolutely immovable on much more serious cyclists' problems. But, in brainstorming mode for the moment, some possibilties might be: Get help from local bike clubs so it's not a one man campaign. As is, they can internally dismiss you as "one kook." Write to the county commissioners or trustees - again, hopefully as a representative of a bike club, perhaps backed by multiple letters. Consider letters to the editor. Finally, since all you're asking for is some paint and a stencil, there's the possibility of doing it guerilla style. Clubs routinely k roads with small direction arrows for century rides. Could a local club k the loop detectors? Sounds like it could be a fun project. - Frank Krygowski
|
| |
Date: 09 Nov 2006 14:36:39
From: Claire Petersky
Subject: Re: Persuading cities to mark loop detectors
|
"Rex Kerr" <rexkerr@gmail.com > wrote in message news:1163057637.422723.240180@f16g2000cwb.googlegroups.com... > I've been going back and forth with both Sacramento county and the city > of Rancho Cordova about two different intersections that I encounter > frequently requesting that they k the signal detectors so that I can > trigger the lights. They could talk to the City of Bellevue. Each of our signals is ked with an X. See: http://www.ci.bellevue.wa.us/transportation_walking.htm, and scroll to "To Activate a Traffic Signal When on a Bike" Kevin's a cool guy -- his phone number and email are over on the right panel on the webpage. I bet he'd be willing to help. Email him and see what he says. -- Warm Regards, Claire Petersky http://www.bicyclemeditations.org/ See the books I've set free at: http://bookcrossing.com/referral/Cpetersky
|
| | |
Date: 09 Nov 2006 18:10:49
From: Frank Drackman
Subject: Re: Persuading cities to mark loop detectors
|
"Claire Petersky" <cpetersky@mouse-potato.com > wrote in message news:X1H4h.4688$ig4.2711@newsread2.news.pas.earthlink.net... > "Rex Kerr" <rexkerr@gmail.com> wrote in message > news:1163057637.422723.240180@f16g2000cwb.googlegroups.com... >> I've been going back and forth with both Sacramento county and the city >> of Rancho Cordova about two different intersections that I encounter >> frequently requesting that they k the signal detectors so that I can >> trigger the lights. > > They could talk to the City of Bellevue. Each of our signals is ked > with an X. See: http://www.ci.bellevue.wa.us/transportation_walking.htm, > and scroll to "To Activate a Traffic Signal When on a Bike" Kevin's a cool > guy -- his phone number and email are over on the right panel on the > webpage. I bet he'd be willing to help. Email him and see what he says. > I totally agree. I have contacted the city with small bicycling issues and they have been extremely responsive. Having the "X" at intersections is great.
|
| |
Date: 09 Nov 2006 01:21:38
From:
Subject: Re: Persuading cities to mark loop detectors
|
Rex Kerr wrote: > I've been going back and forth with both Sacramento county and the city > of Rancho Cordova about two different intersections that I encounter > frequently requesting that they k the signal detectors so that I can > trigger the lights. Unfortunately I keep getting responses that say > something like: > > "That's a motor vehicle lane, not a bike lane." > -- or -- > "The kings in the MUTCD (which I sent them links to) are for special > bicycle detectors, thus we won't be using them." > > It's getting quite frustrating actually. I recently sent this response > to the city (which is very similar to one that I sent to the county). > I'd appreciate any feedback or pointers on how to convince them to work > with me... again, I've already sent links to the DOT website & the DMV > website. > > --- quoted e-mail --- > Thank you for the reply. > > The city of Chico, CA (where I moved here from about a year ago) had > kings at the most sensitive location of almost all of the signal > detector loops within the city limits. These were not specialized > bicycle detectors, but rather they ked the location of the edge of > the loop where they would detect a bicycle. If the detector loop is > visible (in other words, it was installed after the pavement was laid > and the cuts are visible) I can always trigger the loop successfully by > knowing where to place my bicycle. When I contacted the city of Folsom > about a detector loop that was paved over they went out and ked its > location the very same day, and I have had 100% success using the > standard detector. Also, notice that this publication from the CA DOT: > > http://www.dot.ca.gov/hq/tpp/offices/bike/Bike_Bklt_3-03_view.pdf > > ...mentions that the city of Cupertino has used the standard symbol to > k their signal detectors. It makes no mention of these being > special bicycle detectors, rather from the context it is quite clear > that they are writing about standard vehicle detectors. > > Unfortunately your comment that the city plans to paint bicycle lanes > is not a sufficient concession for cyclists. Bicycle lanes present > numerous problems for cyclists, the biggest being that they encourage > dangerous lane positioning and dangerous interaction at intersections. > That issue aside, the bicycle lane would not address my concern about > the signal detectors. > > I noticed that special buttons have been placed at the edge of the > sidewalk at the intersection of Kilgore and Trade Center. This seems > to me to be a very expensive yet ineffective attempt to address the > problem. These buttons encourage cyclists traveling straight to stop > at the button. This position is dangerous because right turning > vehicles will try to squeeze the cyclist and turn right in front of > them. Instead the cyclists is supposed to be positioned much like a > motor vehicle allowing right turning motorists to pass to the right of > them. A standardized king (which many cities HAVE adopted) on the > standard detector encourages a much safer lane position. Moreover, > the button does NOT address the concern of left turning cyclists. How > exactly are we supposed to make left turns? According to the DMV's > website: > > > http://www.dmv.ca.gov/pubs/hdbk/pgs55thru57.htm > > Bicyclists: > > * must ride in the same direction as other traffic, not against it. > * must ride in a straight line as near to the right curb or edge of > the roadway as practical- not on the sidewalk. > * (MADE BOLD AND RED) must make left and right turns in the same > way that drivers do, using the same turn lanes. > * may legally move left to turn left, to pass a parked or moving > vehicle, another bicycle, an animal, or to make a turn, avoid debris, > or other hazards. > * may choose to ride near the left curb or edge of a one-way > street. > * (MADE BOLD AND RED) may use a left turn lane. (MADE BOLD AND > GREEN) If the bicyclist is traveling straight ahead, he or she should > use a through traffic lane rather than ride next to the curb and block > traffic making right turns. > * are lawfully permitted to ride on certain sections of freeways, > when signs are posted. Be careful when approaching or passing a > bicyclist on a freeway. > > Notice that both of my statements are backed up by this quote! > > I hope that you will take the time to research the concerns of > cyclists, look into how cyclists are supposed to interact with other > traffic (the DMV's driver's handbook has good information on this), and > consider how the lack of proper kings makes doing so nearly > impossible. > > Thank you, > -Rex Hi Rex, I have never tried to get such a thing done, but the long mail to bureaucrats at city hall or whereever might be counter-productive. They just think you are some crank. Maybe try going to the guys who would actually make the king and see if they will just do it, or can get it done "bottom-up" rather than "top-down". Sometimes buracracies work better the other way! Or you could k them yourself with a little experimentation. Joseph
|
| | |
Date: 09 Nov 2006 18:25:49
From:
Subject: Re: Persuading cities to mark loop detectors
|
Rex Kerr wrote: > I've been going back and forth with both Sacramento county and the > city of Rancho Cordova about two different intersections that I > encounter frequently requesting that they k the signal detectors > so that I can trigger the lights. Unfortunately I keep getting > responses that say something like: > "That's a motor vehicle lane, not a bike lane." > -- or -- > "The kings in the MUTCD (which I sent them links to) are for > special bicycle detectors, thus we won't be using them." In contrast, in Palo Alto, where Alma St. merges with El Camino Real, there is a pedestrian and bicycle crossing (cars cannot cross this intersection from Alma St.) with a full traffic light and pedestrian signal. The sages provided a pedestrian button AND a separate bicycle loop detector. A 3x5" sign about 10ft back from the pedestrian button points at the road and says "Bicycles Stop Here". Bicyclists don't see the sign or don't trust the detector, so they get up on the sidewalk and press the pedestrian button (if no pedestrian is there). What they don't know is that the detector turns the traffic light green and leaves the pedestrian signal unaffected. The phase for bicycle is half as long as the pedestrian phase so that when bicyclists use the pedestrian button, a six lane road is left Waiting for Godot" at an empty intersection of Sand Hill Rd. and El Camino Real. All they need is a bicycle button, not a loop, at the post where the little sign is located. Jobst Brandt
|
|