| |
Main
Date: 19 Oct 2005 18:56:57
From: John Kaess
Subject: Bike E seat broken
|
I just moved from CA to Jacksonville, FL. The movers broke the seat
on my Bike E AT. The round black plastic disks that are part of the
clamp that holds the seat on were all broken (they took the seat off,
and then tried to put it back on).
Anyway, does anyone know of a bike shop near Jacksonville that might
have parts?
Wasn't there some kind of recall on the seats a few years ago? I
never had it done, and then they went under.
John
|
|
| |
Date: 21 Oct 2005 16:49:28
From: Seldom Seen Poster
Subject: Re: Bike E seat broken
|
Steve knight wrote:
> On Wed, 19 Oct 2005 18:56:57 -0400, John Kaess <johnkaess@cox.net>
> wrote:
>
> >
> >I just moved from CA to Jacksonville, FL. The movers broke the seat
> >on my Bike E AT. The round black plastic disks that are part of the
> >clamp that holds the seat on were all broken (they took the seat off,
> >and then tried to put it back on).
>
> I have seen them on ebay though not for a ltitle bit.
There are some on there now.
<http://cgi.ebay.com/BIKEE-SEAT-SLIDER-REPLACEMENT-KIT_W0QQitemZ7190670048QQcategoryZ106949QQssPageNameZWDVWQQrdZ1QQcmdZViewItem >
I made a pair out of an oak dowel rod a few years back and put the
key-ring thingy on them and they worked well although I only used them
until I got a replacement set. Drilled a hole in them first, then cut
them in half at the hole and did some shaping on the belt sander.
|
| |
Date: 21 Oct 2005 07:52:39
From: Ken the Troll
Subject: Re: Bike E seat broken
|
The fellow who owns the "whytoole" site announced on the bikee list
(bikee-list-request@whettens.org or bikee-list@whettens.org [ if you
are a member]) that he is selling out his stock. However I just checked
his site at
http://members.aol.com/whytoole/WHYTOOLE.html?mtbrand=AOL_US and found
that he has the "The original BikeE Delrin seat sliders with, metal
key rings." on sale for $17.20 for a set of four or two sets for $25.86
with just one set of the reinforcement rings that prevent the problem
you have. Personally, since this is the one item other than the frame
on the BikeE that is unique to the design, I would go with the 8
sliders so that I would have four spairs on hand. I had two sets of the
reinforced sliders that I sold with our old BikeE ATs in August of
2004.
Ken the Troll (I live south of the Mighty Mackinaw Bridge in Michigan
and all down staters are called trolls by the Uppers)
|
| | |
Date: 22 Oct 2005 19:44:30
From: John Kaess
Subject: Re: Bike E seat broken
|
Thank you. That's extremely helpful!
I love newsgroups, and I'll get on the BikeE List
John
On 21 Oct 2005 07:52:39 -0700, "Ken the Troll" <ken.kolk@gmail.com >
wrote:
>The fellow who owns the "whytoole" site announced on the bikee list
>(bikee-list-request@whettens.org or bikee-list@whettens.org [ if you
>are a member]) that he is selling out his stock. However I just checked
>his site at
>http://members.aol.com/whytoole/WHYTOOLE.html?mtbrand=AOL_US and found
>that he has the "The original BikeE Delrin seat sliders with, metal
>key rings." on sale for $17.20 for a set of four or two sets for $25.86
>with just one set of the reinforcement rings that prevent the problem
>you have. Personally, since this is the one item other than the frame
>on the BikeE that is unique to the design, I would go with the 8
>sliders so that I would have four spairs on hand. I had two sets of the
>reinforced sliders that I sold with our old BikeE ATs in August of
>2004.
>
>Ken the Troll (I live south of the Mighty Mackinaw Bridge in Michigan
>and all down staters are called trolls by the Uppers)
|
| |
Date: 20 Oct 2005 22:45:07
From: Pamela D
Subject: Re: Bike E seat broken
|
A Google search on "whytoole" will turn up a small business website on
AOL that used to carry BikeE stuff. I believe the owner still has the
delrin seat sliders available.
You may also wish to subscribe to the BikeE List, a mailing list with
fairly regular postings by BikeE owners (on average I get around a
dozen postings per week). Another Google search on "BikeE List" will
get you to the subscription sign-up page.
|
| |
Date: 20 Oct 2005 19:09:57
From: Steve knight
Subject: Re: Bike E seat broken
|
On Wed, 19 Oct 2005 18:56:57 -0400, John Kaess <johnkaess@cox.net >
wrote:
>
>I just moved from CA to Jacksonville, FL. The movers broke the seat
>on my Bike E AT. The round black plastic disks that are part of the
>clamp that holds the seat on were all broken (they took the seat off,
>and then tried to put it back on).
I have seen them on ebay though not for a ltitle bit.
Knight-Toolworks
http://www.knight-toolworks.com
affordable handmade wooden planes
|
|
