Burley opinions?

bicycle-forum.net
Promoting biking discussion.

Main

Date: 30 Jul 2005 15:31:06
From: CKeller
Subject: Burley opinions?

I'm looking to buy a recumbent and my LBS recommends Burley's. Anyone ride
one of these? Comments? I ride my current DF Trek hybrid bike to and from
work about 10 miles each way. I want to ride further but find the DF too
painful to ride longer distances. I'm probably looking at a SWB since most
of my ride is on city streets (not very busy), but I want to do touring
later on - can a SWB be good for both?

Thank you.

Christy

Date: 04 Aug 2005 14:05:09
From: Servojohn
Subject: Re: Burley opinions?

I think you were responding to my post(as I can't find any other
references to a recumbent for sale in this thread). I'm in the
Chicago area if you're interested in my Limbo.

Best regards,

John

Date: 03 Aug 2005 19:53:03
From: RecumbentMaybe
Subject: Re: Burley opinions?

I converted to a recumbent because my ass got sore at 27km.
But I have discovered setups on DFs which overcome this problem.
1) Get yourself in a more upright riding position. This ensures that
there is less weight on your arms, wrists and that you are sitting on
you sit bones rather than the top of your scrotum. Also you are looking
more straight ahead. (Only Lance Armstrong and wantabees ride the
nutcracker position.)
This is usually done by raising your handle bars. I converted my drop
downs to upright albatross bars.

2) Get a Brooks saddle with springs. B67 or B66 depending on the mount.

The only problem now is that most manufactures manufacture frames with
too steep of a seat tube angle for this setup, so you have to push your
seat as far back in the adjustment as possible.

I still however enjoy the ride of bent's much more.

Date: 01 Aug 2005 10:01:16
From: Dennish
Subject: Re: Burley opinions?

I'm looking for a good used bent. Where are you located? I'm in St.
Louis.

Dennis
Servojohn wrote:
> I've ridden a Limbo for four years now, and it's been fine. At this
> point I'm looking at upgrading to something lighter and without
> suspension for more aggressive riding. I've just upgraded the stock
> crankset to a 165mm arm length(vs. 170mm) and the improved cadence is
> nice, plus I've installed a narrower range cassette in back which helps
> with power transfer. Quality is great, as it is with any Burley
> product.
> Email me if your interested in purchasing my Limbo(as long as you're
> not some scammer with a large cashier's check and an "agent" to handle
> the shipping-sorry for the sarcasm, but this type of scam is getting so
> prevelant it's
> humorous).
>
> Best regards,
>
> John

Date: 01 Aug 2005 11:05:02
From: Slugger
Subject: Re: Burley opinions?

In article <11envmu760noqc9@corp.supernews.com >, CKeller
<cjdragon@dslextreme.com > wrote:

> I'm looking to buy a recumbent and my LBS recommends Burley's. Anyone ride
> one of these? Comments? I ride my current DF Trek hybrid bike to and from
> work about 10 miles each way. I want to ride further but find the DF too
> painful to ride longer distances. I'm probably looking at a SWB since most
> of my ride is on city streets (not very busy), but I want to do touring
> later on - can a SWB be good for both?
>
> Thank you.
>
> Christy

I gotta say the burley seat makes my ass hurt. I rode it for about 15
min. and realized it right away.
Otherwise I think its a nice bike and you can replace that seat with a
rans or whatever.

Date: 31 Jul 2005 18:40:03
From: Servojohn
Subject: Re: Burley opinions?

I just want to understand more clearly, you just bolted a piece of coco
bolo where the shock and spring are, thus making the bike a rigid
hardtail?

John

Date: 01 Aug 2005 22:56:50
From: Steve knight
Subject: Re: Burley opinions?

gOn 31 Jul 2005 18:40:03 -0700, "Servojohn"
<j_challiburton@sbcglobal.net > wrote:

>I just want to understand more clearly, you just bolted a piece of coco
>bolo where the shock and spring are, thus making the bike a rigid
>hardtail?

yep works fine. but I just got a good deal on a suspension fork.
if I find a good deal on a good shock they I will replace it. but I
can't afford a 300.00 shock.
Knight-Toolworks
http://www.knight-toolworks.com
affordable handmade wooden planes

Date: 31 Jul 2005 11:21:43
From: Servojohn
Subject: Re: Burley opinions?

I've ridden a Limbo for four years now, and it's been fine. At this
point I'm looking at upgrading to something lighter and without
suspension for more aggressive riding. I've just upgraded the stock
crankset to a 165mm arm length(vs. 170mm) and the improved cadence is
nice, plus I've installed a narrower range cassette in back which helps
with power transfer. Quality is great, as it is with any Burley
product.
Email me if your interested in purchasing my Limbo(as long as you're
not some scammer with a large cashier's check and an "agent" to handle
the shipping-sorry for the sarcasm, but this type of scam is getting so
prevelant it's
humorous).

Best regards,

John

Date: 31 Jul 2005 12:56:06
From: Steve knight
Subject: Re: Burley opinions?

On 31 Jul 2005 11:21:43 -0700, "Servojohn"
<j_challiburton@sbcglobal.net > wrote:

>I've ridden a Limbo for four years now, and it's been fine. At this
>point I'm looking at upgrading to something lighter and without
>suspension for more aggressive riding. I've just upgraded the stock
>crankset to a 165mm arm length(vs. 170mm) and the improved cadence is
>nice, plus I've installed a narrower range cassette in back which helps
>with power transfer. Quality is great, as it is with any Burley
>product.

I have one too a 2004 model. I finally removed the shock as I would
need to spend about 300 to get oen that really worked well. I just
used a piece of oily tropical hardwood. I like the ride better now. I
also pretty much upgraded everthing on it. new wheels sram x9
drivetrain (big improvement) new rans seat cushin got rid of the stock
pullys for the chain and replaced them with one set from terracycle
and that got rid of the rumble. about the only thing I have nto
replaced are the cranks as I have not found a good deal yet.

Knight-Toolworks
http://www.knight-toolworks.com
affordable handmade wooden planes

Date: 31 Jul 2005 18:20:58
From: John Knez
Subject: Re: Burley opinions?

CKeller wrote:
> I'm looking to buy a recumbent and my LBS recommends Burley's. Anyone ride
> one of these? Comments? I ride my current DF Trek hybrid bike to and from
> work about 10 miles each way. I want to ride further but find the DF too
> painful to ride longer distances. I'm probably looking at a SWB since most
> of my ride is on city streets (not very busy), but I want to do touring
> later on - can a SWB be good for both?
>
> Thank you.
>
> Christy
>
>
I've owned a Burley Django for several years. I love the bike. I ride
thousands of miles per year on it. I find it to be quite comfortable on
centuries. I've had a rack on it since the day I brought it home. For
light loads on day rides it's great. For serious loads I use a trailer.
I don't care for the rack adapter kit that Burley sales. When using
it the rack is not directly attacked to the bike frame. This results in
the rack swaying slightly under heavy load. I've ridden with 30 pounds
on the rack, but it vibrated in a way that left me feeling uneasy. For a
better idea how a rack attaches to a Django have a look at
http://www.burley.com/products/recumbents/default.aspx?p=Rack+Installation+Kit&i=13.

If you were counting on using just a rear rack to carry most of your
load on a tour, I don't think I would recommend the Django. However, I
think the Django makes a fine touring bike, so long as you have an
alternative to loading the rear rack with weight.

---
John Knez

Date: 31 Jul 2005 09:06:05
From: Zach
Subject: Re: Burley opinions?

Date: 31 Jul 2005 09:05:59
From: Zach
Subject: Re: Burley opinions?