| |
Main
Date: 24 May 2005 13:03:36
From:
Subject: Can I clear coat a raw steel fork instead of painting it?
|
Hello bent friends,
I just had a new fork built for my bike out of steel. I really like
the way it looks in it's raw state. Can I just spray paint it with a
clear coat(out of a can)instead of a colored spray paint? Will that
keep it protected from rusting like spray paint does?? Thank you for
any help with this! Anj
|
|
| |
Date: 07 Jun 2005 22:08:45
From: bobleft@aol.com
Subject: Re: Can I clear coat a raw steel fork instead of painting it?
|
> Can I just spray paint it with a
> clear coat(out of a can)instead of a colored spray paint? Will that
> keep it protected from rusting like spray paint does?? Thank you for
> any help with this!
I did this with a frame section sanded down to bare metal. It did
a poor job of preventing rust. (I did not apply wax as another
post suggested.)
|
| |
Date: 30 May 2005 14:19:32
From: Torben Scheel
Subject: Re: Can I clear coat a raw steel fork instead of painting it?
|
rideabike66@hotmail.com wrote:
> Hello bent friends,
>
> I just had a new fork built for my bike out of steel. I really like
> the way it looks in it's raw state. Can I just spray paint it with a
> clear coat(out of a can)instead of a colored spray paint? Will that
> keep it protected from rusting like spray paint does?? Thank you for
> any help with this! Anj
>
I can't speak for other parts of the world, but it would not last half a
winter around here. A lot of salt on the roads.
--
vh
Torben
http://www.dfmc.dk/?id=425
|
| |
Date: 25 May 2005 05:24:09
From: guynoir
Subject: Re: Can I clear coat a raw steel fork instead of painting it?
|
I did clear powdercoat on some aircraft engine parts last year. Did
valve covers, windage tubes, induction tubes. Worked well, was much
easier to apply than paint.
rideabike66@hotmail.com wrote:
> Hello bent friends,
>
> I just had a new fork built for my bike out of steel. I really like
> the way it looks in it's raw state. Can I just spray paint it with a
> clear coat(out of a can)instead of a colored spray paint? Will that
> keep it protected from rusting like spray paint does?? Thank you for
> any help with this! Anj
>
--
John Kimmel
guyinthetrenchcoat@spiretech.com
Naturally, these humorous reks are all entirely my own opinion, based
solely
on rumor, supposition, innuendo and damned lies, and should be
interpreted in a
spirit of fun. My memory is faulty, also.
|
| |
Date: 24 May 2005 17:45:01
From: Jeff Wills
Subject: Re: Can I clear coat a raw steel fork instead of painting it?
|
S. Delaire "Rotatorrecumbent" wrote:
> yes it will be fine
> wax over the clear as a final water proofing agent
> Speedy
>
Steve's the master- but I'll ditto his final comment. "Clearcoat"
paints tend to be porous, and you might end up with rust spots under
the paint. Wax will seal up everything.
That being said- I have a head lug that I brazed to a couple chunks of
tube a couple years back when Match was giving factory tours. I brought
it home and clearcoated it- it still looks fine. Of course, it never
goes outside, either.
Jeff
|
| |
Date: 24 May 2005 13:42:20
From:
Subject: Re: Can I clear coat a raw steel fork instead of painting it?
|
Cool! Thanks Steve, I appreciate your reply. Anj
S. Delaire "Rotatorrecumbent" wrote:
> yes it will be fine
> wax over the clear as a final water proofing agent
> Speedy
>
> rideabike66@hotmail.com wrote:
>
> > Hello bent friends,
> >
> > I just had a new fork built for my bike out of steel. I really like
> > the way it looks in it's raw state. Can I just spray paint it with a
> > clear coat(out of a can)instead of a colored spray paint? Will that
> > keep it protected from rusting like spray paint does?? Thank you for
> > any help with this! Anj
>
>
> ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
| |
Date: 24 May 2005 13:23:44
From: S. Delaire \Rotatorrecumbent\
Subject: Re: Can I clear coat a raw steel fork instead of painting it?
|
yes it will be fine
wax over the clear as a final water proofing agent
Speedy
rideabike66@hotmail.com wrote:
> Hello bent friends,
>
> I just had a new fork built for my bike out of steel. I really like
> the way it looks in it's raw state. Can I just spray paint it with a
> clear coat(out of a can)instead of a colored spray paint? Will that
> keep it protected from rusting like spray paint does?? Thank you for
> any help with this! Anj
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
|
