| |
Main
Date: 15 May 2005 14:05:11
From:
Subject: Changing RANS threaded fork to threadless
|
Hi Bent friends,
I would like to change the threaded fork/headset on my RANS V2 to a to
a threadless fork/headset. How would I go about making the current
handlebar riser work w/the threadless fork? Would the original riser
be able to clamp over this steerer tube extender?
http://harriscyclery.net/site/page.cfm?PageID=49&SKU=SM1977 Looks like
it might have trouble sliding over the top cap. If so any other ideas
how to convert to threadless?? Any help greatly appreciated. Anj
|
|
| |
Date: 22 May 2005 11:32:39
From:
Subject: Re: Changing RANS threaded fork to threadless
|
Thanks Jeff! I appreciate your help w/this!! Anj
Jeff Wills wrote:
> rideabik...@hotmail.com wrote:
> > Hi Bent friends,
> >
> > I would like to change the threaded fork/headset on my RANS V2 to a
> to
> > a threadless fork/headset. How would I go about making the current
> > handlebar riser work w/the threadless fork? Would the original
riser
> > be able to clamp over this steerer tube extender?
> > http://harriscyclery.net/site/page.cfm?PageID=49&SKU=SM1977 Looks
> like
> > it might have trouble sliding over the top cap. If so any other
ideas
> > how to convert to threadless?? Any help greatly appreciated. Anj
>
>
> If you turn down the lip of the top cap, the original riser should
fit.
> That's assuming everything is the same diameter- that extender fits 1
> 1/8" diameter forks and headsets only.
>
> Jeff
|
| |
Date: 15 May 2005 17:50:24
From: Jeff Wills
Subject: Re: Changing RANS threaded fork to threadless
|
rideabik...@hotmail.com wrote:
> Hi Bent friends,
>
> I would like to change the threaded fork/headset on my RANS V2 to a
to
> a threadless fork/headset. How would I go about making the current
> handlebar riser work w/the threadless fork? Would the original riser
> be able to clamp over this steerer tube extender?
> http://harriscyclery.net/site/page.cfm?PageID=49&SKU=SM1977 Looks
like
> it might have trouble sliding over the top cap. If so any other ideas
> how to convert to threadless?? Any help greatly appreciated. Anj
If you turn down the lip of the top cap, the original riser should fit.
That's assuming everything is the same diameter- that extender fits 1
1/8" diameter forks and headsets only.
Jeff
|
|
