| |
Main
Date: 27 Dec 2004 13:35:25
From: Emil
Subject: Ground Hugger XR2
|
http://www.rqriley.com/xr2.html
Has anyone in this message area built this bike? I bought the plans and I
think I will make this a project.
--
Emil Luca
|
|
| |
Date: 03 Jan 2005 06:20:18
From:
Subject: Re: Ground Hugger XR2
|
> "Rob" <dakker44@shaw.ca> wrote in message
> news:znLAd.615809$nl.93645@pd7tw3no...
> > Hi Emil,
> >
> > I too was looking at the plans. I found one person that built it,
(I
> > can't remember his name). By the sounds of it, after completing
the
> > project he didn't ride it much. I am not sure why.
Looks to me like this design results in a very tight riding angle, i.e.
the rider is scrunched up. The seat back is nearly vertical and the BB
is higher than the seat base. I don't think this would be a comfortable
riding position.
|
| | |
Date: 03 Jan 2005 14:27:43
From: Emil
Subject: Re: Ground Hugger XR2
|
After watching the video provided I do notice that there is little room
between the steering column and the rider.
I am obese and plan on using a recumbent bike for exercise. I use a EZ-1
now with no problem.
I think I should build a template out of wood to see if I fit.
--
Emil Luca
<lostjohnriley@netscape.net > wrote in message
news:1104762018.038428.168330@z14g2000cwz.googlegroups.com...
>
>> "Rob" <dakker44@shaw.ca> wrote in message
>> news:znLAd.615809$nl.93645@pd7tw3no...
>> > Hi Emil,
>> >
>> > I too was looking at the plans. I found one person that built it,
> (I
>> > can't remember his name). By the sounds of it, after completing
> the
>> > project he didn't ride it much. I am not sure why.
>
> Looks to me like this design results in a very tight riding angle, i.e.
> the rider is scrunched up. The seat back is nearly vertical and the BB
> is higher than the seat base. I don't think this would be a comfortable
> riding position.
>
|
| | | |
Date: 03 Jan 2005 23:39:33
From: Mark Leuck
Subject: Re: Ground Hugger XR2
|
I noticed the fairly upright position as well but no reason you can't alter
the design to suit your taste
My feeling is tho it is more complex and heavier than it needs to be, plenty
of other designs out there that might be better and easier to make
"Emil" <e_lucaREMOVE@yahoo.com > wrote in message
news:zDcCd.3997$Vj3.541@newssvr17.news.prodigy.com...
> After watching the video provided I do notice that there is little room
> between the steering column and the rider.
> I am obese and plan on using a recumbent bike for exercise. I use a EZ-1
> now with no problem.
> I think I should build a template out of wood to see if I fit.
>
>
> --
> Emil Luca
>
> <lostjohnriley@netscape.net> wrote in message
> news:1104762018.038428.168330@z14g2000cwz.googlegroups.com...
> >
> >> "Rob" <dakker44@shaw.ca> wrote in message
> >> news:znLAd.615809$nl.93645@pd7tw3no...
> >> > Hi Emil,
> >> >
> >> > I too was looking at the plans. I found one person that built it,
> > (I
> >> > can't remember his name). By the sounds of it, after completing
> > the
> >> > project he didn't ride it much. I am not sure why.
> >
> > Looks to me like this design results in a very tight riding angle, i.e.
> > the rider is scrunched up. The seat back is nearly vertical and the BB
> > is higher than the seat base. I don't think this would be a comfortable
> > riding position.
> >
>
>
|
| | | | |
Date: 04 Jan 2005 15:14:05
From: Emil
Subject: Re: Ground Hugger XR2
|
The EZ rider is upright itself. I really am interested in using carbon
fiber as a frame. I have zero knowledge about welding and or tube bending
and no equipment to do either. From looking at what is out there you can go
from a lazy chair position to upright and SWB, LWB etc....
We will see how it may proceed as you said it could be modified. I am
fortunate to be at a place that teaches Rhino and have access to a few
people that will help modify the drawings if I ask.
--
Emil Luca
"k Leuck" <m..leuck@comcast.net > wrote in message
news:UIkCd.844887$8_6.435483@attbi_s04...
>I noticed the fairly upright position as well but no reason you can't alter
> the design to suit your taste
>
> My feeling is tho it is more complex and heavier than it needs to be,
> plenty
> of other designs out there that might be better and easier to make
>
> "Emil" <e_lucaREMOVE@yahoo.com> wrote in message
> news:zDcCd.3997$Vj3.541@newssvr17.news.prodigy.com...
>> After watching the video provided I do notice that there is little room
>> between the steering column and the rider.
>> I am obese and plan on using a recumbent bike for exercise. I use a EZ-1
>> now with no problem.
>> I think I should build a template out of wood to see if I fit.
>>
>>
>> --
>> Emil Luca
>>
>> <lostjohnriley@netscape.net> wrote in message
>> news:1104762018.038428.168330@z14g2000cwz.googlegroups.com...
>> >
>> >> "Rob" <dakker44@shaw.ca> wrote in message
>> >> news:znLAd.615809$nl.93645@pd7tw3no...
>> >> > Hi Emil,
>> >> >
>> >> > I too was looking at the plans. I found one person that built it,
>> > (I
>> >> > can't remember his name). By the sounds of it, after completing
>> > the
>> >> > project he didn't ride it much. I am not sure why.
>> >
>> > Looks to me like this design results in a very tight riding angle, i.e.
>> > the rider is scrunched up. The seat back is nearly vertical and the BB
>> > is higher than the seat base. I don't think this would be a comfortable
>> > riding position.
>> >
>>
>>
>
>
|
| | | | | |
Date: 05 Jan 2005 09:50:27
From: hhu
Subject: Re: Ground Hugger XR2
|
Take a look at these ttwo sites for some real CF inspiration:
http://www.jjscozzi.com/
and
http://users.skynet.be/benoit.dery/
If these sites can't make your blood boil, you must be dead!
TD
|
| | | | | | |
Date: 05 Jan 2005 19:41:00
From: Emil
Subject: Re: Ground Hugger XR2
|
Certainly RECUMBENT.
--
Emil Luca
"hhu" <uuhh > wrote in message
news:933ot0pj2jvk3ld2b82pj7a1ih4tlvls97@4ax.com...
> Take a look at these ttwo sites for some real CF inspiration:
>
> http://www.jjscozzi.com/
>
> and
>
> http://users.skynet.be/benoit.dery/
>
> If these sites can't make your blood boil, you must be dead!
>
> TD
|
| | | | | | |
Date: 05 Jan 2005 10:43:53
From: hhu
Subject: Re: Ground Hugger XR2
|
I don't mak a habit of double posting. Power went dead right about
the time I hit the send button. Damned winter weather!
TD
|
| | | | | |
Date: 05 Jan 2005 08:37:34
From: hhu
Subject: Re: Ground Hugger XR2
|
Take a look at these two sites for some CF inspiration:
http://www.jjscozzi.com/
and
http://users.skynet.be/benoit.dery/
If these sites don't get your blood boiling you must be dead!
TD
|
| | | |
Date: 03 Jan 2005 10:26:52
From: skip
Subject: Re: Ground Hugger XR2
|
"Emil" <e_lucaREMOVE@yahoo.com > wrote in message
news:zDcCd.3997$Vj3.541@newssvr17.news.prodigy.com...
> After watching the video provided I do notice that there is little room
> between the steering column and the rider.
> I am obese and plan on using a recumbent bike for exercise. I use a EZ-1
> now with no problem.
> I think I should build a template out of wood to see if I fit.
>
>
> --
> Emil Luca
>
> <lostjohnriley@netscape.net> wrote in message
> news:1104762018.038428.168330@z14g2000cwz.googlegroups.com...
>>
>>> "Rob" <dakker44@shaw.ca> wrote in message
>>> news:znLAd.615809$nl.93645@pd7tw3no...
>>> > Hi Emil,
>>> >
>>> > I too was looking at the plans. I found one person that built it,
>> (I
>>> > can't remember his name). By the sounds of it, after completing
>> the
>>> > project he didn't ride it much. I am not sure why.
>>
>> Looks to me like this design results in a very tight riding angle, i.e.
>> the rider is scrunched up. The seat back is nearly vertical and the BB
>> is higher than the seat base. I don't think this would be a comfortable
>> riding position.
>>
>
>
Emil:
My take on the Groundhugger (a 40 some odd year old design) is that very few
of them have been built and only a few of them, if any, are ridden
regularly. If the designer or anyone else can provide information to the
contrary, I will stand corrected. As suggested in the video and pointed out
by Mr. Riley the riding position of the Groundhugger appears to be very
uncomfortable and scrunched up.
My question to you is this - why not build a Tour Easy clone? Many Tour
Easy clones have been built successfully over the years and are in daily
use. If you are riding an EZ 1 with success I would think a Tour Easy clone
would provide you with great additional benefits, comfort and enjoyment.
My advice - cut your loss on the Groundhugger and take a look at the Tour
Easy plans offered here:
http://members.cox.net/lioninoil/plans.htm
As an added bonus you would have access to help and support from
homebuilders on the internet.
skip
|
| |
Date: 30 Dec 2004 04:21:51
From: Rob
Subject: Re: Ground Hugger XR2
|
Hi Emil,
I too was looking at the plans. I found one person that built it, (I can't
remember his name). By the sounds of it, after completing the project he
didn't ride it much. I am not sure why. I am extremely interested in your
results and I am hoping that you will communicate them on this forum for all
of us to read.
Dakker.
"Emil" <e_lucaREMOVE@yahoo.com > wrote in message
news:xcUzd.6000$_X7.3782@newssvr33.news.prodigy.com...
> http://www.rqriley.com/xr2.html
> Has anyone in this message area built this bike? I bought the plans and I
> think I will make this a project.
>
>
> --
> Emil Luca
>
>
|
| | |
Date: 02 Jan 2005 02:39:15
From: Emil Luca
Subject: Re: Ground Hugger XR2
|
I received the plans today and looked over them briefly. I have a friend
that built a Cozy airplane that is carbon fiber and I am trying to get a
hold of him to pick his brains for suppliers in my neck of the woods.
If I do get it started I certainly will keep the group informed of the
progress.
"Rob" <dakker44@shaw.ca > wrote in message
news:znLAd.615809$nl.93645@pd7tw3no...
> Hi Emil,
>
> I too was looking at the plans. I found one person that built it, (I
> can't remember his name). By the sounds of it, after completing the
> project he didn't ride it much. I am not sure why. I am extremely
> interested in your results and I am hoping that you will communicate them
> on this forum for all of us to read.
>
> Dakker.
>
>
> "Emil" <e_lucaREMOVE@yahoo.com> wrote in message
> news:xcUzd.6000$_X7.3782@newssvr33.news.prodigy.com...
>> http://www.rqriley.com/xr2.html
>> Has anyone in this message area built this bike? I bought the plans and
>> I think I will make this a project.
>>
>>
>> --
>> Emil Luca
>>
>>
>
>
>
|
| | | |
Date: 03 Jan 2005 11:45:56
From: KDSVR40
Subject: Re: Ground Hugger XR2
|
Emil Luca Wrote:
> I received the plans today and looked over them briefly. I have
> friend
> that built a Cozy airplane that is carbon fiber and I am trying to ge
> a
> hold of him to pick his brains for suppliers in my neck of the woods.
> If I do get it started I certainly will keep the group informed of the
> progress.
>
>
> Emil, For your composite supplies, Aircraft Spruce and Specialty doe
> a good mail order business or Wicks Aircraft and Supply. These are th
> two main ones I used when I built an experimental aircraft. Aircraf
> Spruce has stores east and west. Wicks is in Highland, IL. Look the
> up online. Each have nice catalogues and all the composite supplie
> you'd need.
>
> Let us know how it goes. I've looked at those plans a few times an
> I'm really tempted... Ke
--
KDSVR40
|
|
