| |
Main
Date: 12 Oct 2006 10:22:17
From: Ken Bradley
Subject: Helmeit mirror design
|
I would like to pass on an idea for a mirror that has works good for me. I
ride a SWB, USS so I had to get the mirror higher.
Bend a coat hanger two right angles and attach a plastic frame convex stick
on mirror (sold at Grand Auto for you car sun visor) Attach the other end to
your helmet visor, I used wire ties and glue. Cheep and works great. See my
pic. posted on:http://s84.photobucket.com/albums/k27/kengee_photo/
|
|
| |
Date: 12 Oct 2006 18:21:25
From: Johnny Sunset aka Tom Sherman
Subject: Re: Helmeit mirror design
|
Ken Bradley wrote:
> I would like to pass on an idea for a mirror that has works good for me. I
> ride a SWB, USS so I had to get the mirror higher.
>
> Bend a coat hanger two right angles and attach a plastic frame convex stick
> on mirror (sold at Grand Auto for you car sun visor) Attach the other end to
> your helmet visor, I used wire ties and glue. Cheep and works great. See my
> pic. posted on:http://s84.photobucket.com/albums/k27/kengee_photo/
A used stainless steel spoke is better than a piece of coat hanger,
since the AISI 303/304 stainless steels typically used for higher
quality spokes are quite corrosion resistant.
--
Tom Sherman - Here, not there.
|
| |
Date: 12 Oct 2006 11:12:08
From: Ken Bradley
Subject: Re: Helmeit mirror design
|
Oh yes, I forgot to memtsion: Use some small sheet metal screw to attach
the visor to the helmet. Valcro will not cut it with the mirror! Kengee
"Ken Bradley" <kengee@comcast.net > wrote in message
news:ncidnQvKTYBM5LPYnZ2dnUVZ_umdnZ2d@comcast.com...
>I would like to pass on an idea for a mirror that has works good for me. I
>ride a SWB, USS so I had to get the mirror higher.
>
> Bend a coat hanger two right angles and attach a plastic frame convex
> stick on mirror (sold at Grand Auto for you car sun visor) Attach the
> other end to your helmet visor, I used wire ties and glue. Cheep and works
> great. See my pic. posted
> on:http://s84.photobucket.com/albums/k27/kengee_photo/
>
>
|
|
