| |
Main
Date: 26 Sep 2007 00:37:02
From: Johan Bornman
Subject: Alex 320 rim ERD please
|
Does anyone have the ERD of an Alex 320 rim for me please? The rim is
not listed on the Alexrims website since it is usually sold as part of
a pre-built wheel. Also, I can't measure it because I haven't got it
yet and I'd like to order spokes in the meantime.
Thanks
JB
|
|
| |
Date: 01 Oct 2007 23:48:58
From: Johan Bornman
Subject: Re: Alex 320 rim ERD please
|
Victor Kan wrote:
> > This doesn't give the ERD, but if the rim is the one on the Alex/A-
> Class 320 wheel, the spoke lengths for their particular build are here
> (so if you can just find their hub specs--good luck! :-) :
>
> http://www.aclass-wheels.com/road_alx320DX.html
>
> But that page has a rim profile showing that it is 27mm deep and looks
> very similar to their DA-28 rim, which has listed ERD of:
>
> 700C-480g, ERD 584.8mm, ETRTO 622X14
> 650C-420g, ERD 534.1mm, ETRTO 571X14mm
Thanks Victor. I went the conservative route and waited until the rim
arrived. I measured it this morning and the ERD is 590mm.
JB
|
| |
Date: 01 Oct 2007 23:47:27
From: Johan Bornman
Subject: Re: Alex 320 rim ERD please
|
landotter wrote:
>
> Where did you get the rims? I'd love to know a source for more Alex
> rims other than the 3-4 common models.
The local A-Class wheel importer in South Africa brings the rims in as
spares for the wheels. They sell them separately.
JB
|
| |
Date: 26 Sep 2007 22:39:36
From: Victor Kan
Subject: Re: Alex 320 rim ERD please
|
On Sep 26, 3:37 am, Johan Bornman <coldb...@telkomsa.net > wrote:
> Does anyone have the ERD of an Alex 320 rim for me please? The rim is
> not listed on the Alexrims website since it is usually sold as part of
> a pre-built wheel. Also, I can't measure it because I haven't got it
> yet and I'd like to order spokes in the meantime.
This doesn't give the ERD, but if the rim is the one on the Alex/A-
Class 320 wheel, the spoke lengths for their particular build are here
(so if you can just find their hub specs--good luck! :-) :
http://www.aclass-wheels.com/road_alx320DX.html
But that page has a rim profile showing that it is 27mm deep and looks
very similar to their DA-28 rim, which has listed ERD of:
700C-480g, ERD 584.8mm, ETRTO 622X14
650C-420g, ERD 534.1mm, ETRTO 571X14mm
|
| |
Date: 26 Sep 2007 20:24:25
From: landotter
Subject: Re: Alex 320 rim ERD please
|
On Sep 26, 2:37 am, Johan Bornman <coldb...@telkomsa.net > wrote:
> Does anyone have the ERD of an Alex 320 rim for me please? The rim is
> not listed on the Alexrims website since it is usually sold as part of
> a pre-built wheel. Also, I can't measure it because I haven't got it
> yet and I'd like to order spokes in the meantime.
Where did you get the rims? I'd love to know a source for more Alex
rims other than the 3-4 common models.
|
|
