| |
Main
Date: 10 Aug 2007 09:58:39
From: Kenny
Subject: Carbon Steerer Expansion Plug Installation?
|
Got an Easton all carbon fork. It came with what I think is an
expansion plug that goes into the steerer. The instructions that came
with the fork on how to install this plug isn't clear to me. So my
question is, how do I install it correctly? I have a picture of it
here:
http://bayimg.com/caFnKaABH
Thanks,
Kenny
|
|
| |
Date: 11 Aug 2007 14:38:20
From: Qui si parla Campagnolo-www.vecchios.com
Subject: Re: Carbon Steerer Expansion Plug Installation?
|
On Aug 10, 10:58 am, Kenny <Postoas...@gmail.com > wrote:
> Got an Easton all carbon fork. It came with what I think is an
> expansion plug that goes into the steerer. The instructions that came
> with the fork on how to install this plug isn't clear to me. So my
> question is, how do I install it correctly? I have a picture of it
> here:
>
> http://bayimg.com/caFnKaABH
>
> Thanks,
> Kenny
Screw the bolt in a wee bit, insert into fork steerter and the ridges
of the lower part wiull begin to grip the inside of the
steerer...allowing you to further tighten the top bolt, adjusting the
headset..then secure the bolts on the stem around the fork
steerer..about 5nm is what you are looking for.
|
| |
Date: 11 Aug 2007 06:14:18
From: Kenny
Subject: Re: Carbon Steerer Expansion Plug Installation?
|
On Aug 11, 7:50 pm, "Tim McTeague" <mctea...@comcast.net > wrote:
> This is a newsgroup, not a forum. "Bump" does not move your msg to the top.
>
> Tim
>
> "Kenny" <Postoas...@gmail.com> wrote in message
>
> news:1186796031.601150.168030@i38g2000prf.googlegroups.com...
>
> > Bump.
It does if your're using your browser and "groups.google.com" to read
the messages.
|
| | |
Date: 11 Aug 2007 07:58:53
From: Bill Sornson
Subject: Re: Carbon Steerer Expansion Plug Installation?
|
Anti-bump
|
| |
Date: 10 Aug 2007 18:33:51
From: Kenny
Subject: Re: Carbon Steerer Expansion Plug Installation?
|
Bump.
|
| | |
Date: 11 Aug 2007 07:50:05
From: Tim McTeague
Subject: Re: Carbon Steerer Expansion Plug Installation?
|
This is a newsgroup, not a forum. "Bump" does not move your msg to the top.
Tim
"Kenny" <Postoasted@gmail.com > wrote in message
news:1186796031.601150.168030@i38g2000prf.googlegroups.com...
> Bump.
>
|
|
