| |
Main
Date: 31 May 2007 07:53:51
From: Johan Bornman
Subject: ERD of DRC MT 17 Rim Please
|
I'll appreciate it if anyone can give me the ERD of a DRC MT 17 rim
please. I have ordered one, it's on its way but neither the dealer nor
the DRC website (terrible by anyone's standards) can give me an
answer. I'd like to get the spokes ready for when it arrives.
Thanks
Johan Bornman
|
|
| |
Date: 31 May 2007 22:08:30
From: Johan Bornman
Subject: Re: ERD of DRC MT 17 Rim Please
|
On Jun 1, 12:28 am, Qui si parla Campagnolo <p...@vecchios.com > wrote:
> On May 31, 8:53 am, Johan Bornman <coldb...@telkomsa.net> wrote:
>
> > I'll appreciate it if anyone can give me the ERD of a DRC MT 17 rim
> > please. I have ordered one, it's on its way but neither the dealer nor
> > the DRC website (terrible by anyone's standards) can give me an
> > answer. I'd like to get the spokes ready for when it arrives.
>
> > Thanks
> > Johan Bornman
>
> Got a LBS that uses the Wheelsmith Spoc-calc system?..they have some
> rods where they can measure the ERD.
Thanks, but the point is that I have not got the rim in my hands yet.
Once I have it, I can obviously measure it.
JB
|
| | |
Date: 08 Jun 2007 11:53:03
From: Rocky
Subject: Re: ERD of DRC MT 17 Rim Please
|
never believe published ERDs anyway. I've been burned more than once and
had to get different spokes once I had the rim in my hands.
rocky
"Johan Bornman" <coldbeer@telkomsa.net > wrote in message
news:1180674510.025793.231370@g4g2000hsf.googlegroups.com...
> On Jun 1, 12:28 am, Qui si parla Campagnolo <p...@vecchios.com> wrote:
>> On May 31, 8:53 am, Johan Bornman <coldb...@telkomsa.net> wrote:
>>
>> > I'll appreciate it if anyone can give me the ERD of a DRC MT 17 rim
>> > please. I have ordered one, it's on its way but neither the dealer nor
>> > the DRC website (terrible by anyone's standards) can give me an
>> > answer. I'd like to get the spokes ready for when it arrives.
>>
>> > Thanks
>> > Johan Bornman
>>
>> Got a LBS that uses the Wheelsmith Spoc-calc system?..they have some
>> rods where they can measure the ERD.
>
> Thanks, but the point is that I have not got the rim in my hands yet.
> Once I have it, I can obviously measure it.
>
> JB
>
|
| |
Date: 31 May 2007 15:41:51
From: Thomas Hood
Subject: Re: ERD of DRC MT 17 Rim Please
|
On May 31, 11:28 pm, Qui si parla Campagnolo <p...@vecchios.com >
wrote:
> On May 31, 8:53 am, Johan Bornman <coldb...@telkomsa.net> wrote:
>
> > I'll appreciate it if anyone can give me the ERD of a DRC MT 17 rim
> > please. I have ordered one, it's on its way but neither the dealer nor
> > the DRC website (terrible by anyone's standards) can give me an
> > answer. I'd like to get the spokes ready for when it arrives.
>
> > Thanks
> > Johan Bornman
>
> Got a LBS that uses the Wheelsmith Spoc-calc system?..they have some
> rods where they can measure the ERD.
Or if you've a couple of old spokes:
http://www.damonrinard.com/spocalc.htm (scroll down)
Regards,
Thomas Hood
|
| |
Date: 31 May 2007 15:28:25
From: Qui si parla Campagnolo
Subject: Re: ERD of DRC MT 17 Rim Please
|
On May 31, 8:53 am, Johan Bornman <coldb...@telkomsa.net > wrote:
> I'll appreciate it if anyone can give me the ERD of a DRC MT 17 rim
> please. I have ordered one, it's on its way but neither the dealer nor
> the DRC website (terrible by anyone's standards) can give me an
> answer. I'd like to get the spokes ready for when it arrives.
>
> Thanks
> Johan Bornman
Got a LBS that uses the Wheelsmith Spoc-calc system?..they have some
rods where they can measure the ERD.
|
|
