| |
Main
Date: 05 Jul 2007 14:29:57
From: Scott Gordo
Subject: Lost an Ultegra dust cap
|
Hit a grease spot in a turn last week and took a nice little slide.
The bike wasn't too bad off, just some scuffed bar tape and the like.
I did, however, manage to dislodge and lose the little plastic dust
cap from the 1999 Ultegra 6500 brifter.
I've replaced it before -- a friendly LBS had an old lever that had
stopped ratcheting and pulled it off. I stopped by and asked for
another one but no luck.
Anybody know where to find another one of these little annoyances?
Scott
|
|
| |
Date: 05 Jul 2007 10:19:46
From: thejen12
Subject: Re: Lost an Ultegra dust cap
|
On Jul 5, 7:29 am, Scott Gordo <blubberp...@gmail.com > wrote:
> Hit a grease spot in a turn last week and took a nice little slide.
>
> The bike wasn't too bad off, just some scuffed bar tape and the like.
> I did, however, manage to dislodge and lose the little plastic dust
> cap from the 1999 Ultegra 6500 brifter.
>
> I've replaced it before -- a friendly LBS had an old lever that had
> stopped ratcheting and pulled it off. I stopped by and asked for
> another one but no luck.
>
> Anybody know where to find another one of these little annoyances?
>
> Scott
Check with your LBS. I had some work done on my bike recently and at
the end of it an old, scratched up dust cap was missing. I remarked
on it to the LBS. They immediately pulled out a box containing a
whole bunch of new dust caps and put one on my bike.
Jenn
|
| |
Date: 05 Jul 2007 15:58:51
From: Qui si parla Campagnolo
Subject: Re: Lost an Ultegra dust cap
|
On Jul 5, 8:29 am, Scott Gordo <blubberp...@gmail.com > wrote:
> Hit a grease spot in a turn last week and took a nice little slide.
>
> The bike wasn't too bad off, just some scuffed bar tape and the like.
> I did, however, manage to dislodge and lose the little plastic dust
> cap from the 1999 Ultegra 6500 brifter.
>
> I've replaced it before -- a friendly LBS had an old lever that had
> stopped ratcheting and pulled it off. I stopped by and asked for
> another one but no luck.
>
> Anybody know where to find another one of these little annoyances?
>
> Scott
I think we still have the old ones...'may' say flitedeck on it..call
us
303-440-3535
Vecchio's
|
| | |
Date: 05 Jul 2007 18:33:34
From: John Forrest Tomlinson
Subject: Re: Lost an Ultegra dust cap
|
On Thu, 05 Jul 2007 15:58:51 -0000, Qui si parla Campagnolo
<peter@vecchios.com > wrote:
>On Jul 5, 8:29 am, Scott Gordo <blubberp...@gmail.com> wrote:
>> Hit a grease spot in a turn last week and took a nice little slide.
>>
>> The bike wasn't too bad off, just some scuffed bar tape and the like.
>> I did, however, manage to dislodge and lose the little plastic dust
>> cap from the 1999 Ultegra 6500 brifter.
>>
>> I've replaced it before -- a friendly LBS had an old lever that had
>> stopped ratcheting and pulled it off. I stopped by and asked for
>> another one but no luck.
>>
>> Anybody know where to find another one of these little annoyances?
>>
>> Scott
>
>I think we still have the old ones...'may' say flitedeck on it..call
>us
>
>303-440-3535
And Scott, if that doesn't work post again or email me -- I may have
one in a box I have to dig out anyway this weekend.
--
JT
****************************
Remove "remove" to reply
Visit http://www.jt10000.com
****************************
|
|
