| |
Main
Date: 13 Sep 2007 15:21:02
From: crb
Subject: Rust on Shimano SPD pedals
|
I have a pair of M540 pedals and the steel components (springs,
screws, clasp) are starting to rust (not the axle).
I have had some suggestions about looking after them better.
Can anyone tell me if the higher-spec pedals (M770 or M970) are better
at resisting rust?
Thanks.
|
|
| |
Date: 14 Sep 2007 09:26:43
From: Peter Cole
Subject: Re: Rust on Shimano SPD pedals
|
crb wrote:
> I have a pair of M540 pedals and the steel components (springs,
> screws, clasp) are starting to rust (not the axle).
>
> I have had some suggestions about looking after them better.
>
> Can anyone tell me if the higher-spec pedals (M770 or M970) are better
> at resisting rust?
>
> Thanks.
>
I several have Shimano SPD pedals all over the price range, and rust
hasn't been a problem except when light surface rust changes (increases)
the disengagement force. This seems to only happen when the pedals have
been put away wet & not ridden for some time (like months). I've used a
wire brush to get them smooth again. I find that a little lube on the
pedal/cleat interface helps getting a predictable release force, too.
None of my Shimano pedals appear to have any stainless parts.
|
| |
Date: 13 Sep 2007 21:58:07
From: jim beam
Subject: Re: Rust on Shimano SPD pedals
|
crb wrote:
> I have a pair of M540 pedals and the steel components (springs,
> screws, clasp) are starting to rust (not the axle).
>
> I have had some suggestions about looking after them better.
>
> Can anyone tell me if the higher-spec pedals (M770 or M970) are better
> at resisting rust?
>
> Thanks.
>
yes - one of the alternatives you cite is stainless steel. the answers
are out there at shimano.com.
|
| |
Date: 13 Sep 2007 19:00:56
From: Phil
Subject: Re: Rust on Shimano SPD pedals
|
crb wrote:
>I have a pair of M540 pedals and the steel components (springs,
> screws, clasp) are starting to rust (not the axle).
>
> I have had some suggestions about looking after them better.
>
> Can anyone tell me if the higher-spec pedals (M770 or M970) are better
> at resisting rust?
>
> Thanks.
Don't worry about it. Keep the outside (away from the axle) lubed with a
light lube/water displacer like WD-40 and the parts with metal-to-metal
contact will keep themselves rust-free from the constant contact. Use
something slightly heavier like mineral oil if you wish to apply less
frequently.
--
Phil
|
| | |
Date: 13 Sep 2007 21:36:15
From: Michael Press
Subject: Re: Rust on Shimano SPD pedals
|
In article <46e9c5cd$0$32560$4c368faf@roadrunner.com >,
"Phil" <nice@try.to > wrote:
> crb wrote:
> >I have a pair of M540 pedals and the steel components (springs,
> > screws, clasp) are starting to rust (not the axle).
> >
> > I have had some suggestions about looking after them better.
> >
> > Can anyone tell me if the higher-spec pedals (M770 or M970) are better
> > at resisting rust?
> >
> > Thanks.
>
> Don't worry about it. Keep the outside (away from the axle) lubed with a
> light lube/water displacer like WD-40 and the parts with metal-to-metal
> contact will keep themselves rust-free from the constant contact. Use
> something slightly heavier like mineral oil if you wish to apply less
> frequently.
WD-40, for all its good qualities, is not lubricant.
--
Michael Press
|
| | | |
Date: 16 Sep 2007 01:31:40
From: Phil
Subject: Re: Rust on Shimano SPD pedals
|
Michael Press wrote:
> In article <46e9c5cd$0$32560$4c368faf@roadrunner.com>,
> "Phil" <nice@try.to> wrote:
>
>> crb wrote:
>> >I have a pair of M540 pedals and the steel components (springs,
>> > screws, clasp) are starting to rust (not the axle).
>> >
>> > I have had some suggestions about looking after them better.
>> >
>> > Can anyone tell me if the higher-spec pedals (M770 or M970) are
>> > better at resisting rust?
>> >
>> > Thanks.
>>
>> Don't worry about it. Keep the outside (away from the axle) lubed
>> with a light lube/water displacer like WD-40 and the parts with
>> metal-to-metal contact will keep themselves rust-free from the
>> constant contact. Use something slightly heavier like mineral oil
>> if you wish to apply less frequently.
>
> WD-40, for all its good qualities, is not lubricant.
Who said anything about lubricating?
--
Phil
|
| | | | |
Date: 17 Sep 2007 04:18:27
From: Michael Press
Subject: Re: Rust on Shimano SPD pedals
|
In article <46ecbfb4$0$19591$4c368faf@roadrunner.com >,
"Phil" <nice@try.to > wrote:
> Michael Press wrote:
> > In article <46e9c5cd$0$32560$4c368faf@roadrunner.com>,
> > "Phil" <nice@try.to> wrote:
> >
> >> crb wrote:
> >> >I have a pair of M540 pedals and the steel components (springs,
> >> > screws, clasp) are starting to rust (not the axle).
> >> >
> >> > I have had some suggestions about looking after them better.
> >> >
> >> > Can anyone tell me if the higher-spec pedals (M770 or M970) are
> >> > better at resisting rust?
> >> >
> >> > Thanks.
> >>
> >> Don't worry about it. Keep the outside (away from the axle) lubed
> >> with a light lube/water displacer like WD-40 and the parts with
> >> metal-to-metal contact will keep themselves rust-free from the
> >> constant contact. Use something slightly heavier like mineral oil
> >> if you wish to apply less frequently.
> >
> > WD-40, for all its good qualities, is not lubricant.
>
> Who said anything about lubricating?
Look in the paragraph to which I replied.
What does `lubed' mean?
--
Michael Press
|
| |
Date: 13 Sep 2007 23:16:48
From: Mike Jacoubowsky
Subject: Re: Rust on Shimano SPD pedals
|
>I have a pair of M540 pedals and the steel components (springs,
> screws, clasp) are starting to rust (not the axle).
>
> I have had some suggestions about looking after them better.
>
> Can anyone tell me if the higher-spec pedals (M770 or M970) are better
> at resisting rust?
I believe the higher-end pedals will be more resistant to rust, but all it
takes to keep pedal springs etc from rusting is a bit of oil. Also, a small
amount of oxidation should be considered more a cosmetic than functional
issue; rusted-through components on Shimano pedals are very rare (don't
recall that I've ever seen a broken spring).
--Mike Jacoubowsky
Chain Reaction Bicycles
www.ChainReaction.com
Redwood City & Los Altos, CA USA
|
|
