| |
Main
Date: 23 May 2007 11:56:44
From: still me
Subject: TA Cyclo Triple bolts ?
|
How long are the TA cyclo-ish triple bolts (actually, the sleeves)
from inner shoulder to end? Do they normally come up flush with the
face of the middle chainwheel when assembled with spacers?
I have an "interesting" existing TA setup and I am trying to figure
out if the sleeves used are triples (and thereby figure out if I need
to order some additional bolts from Sheldon).
Thanks,
|
|
| |
Date: 24 May 2007 00:40:04
From: A Muzi
Subject: Re: TA Cyclo Triple bolts ?
|
still me wrote:
> How long are the TA cyclo-ish triple bolts (actually, the sleeves)
> from inner shoulder to end? Do they normally come up flush with the
> face of the middle chainwheel when assembled with spacers?
>
> I have an "interesting" existing TA setup and I am trying to figure
> out if the sleeves used are triples (and thereby figure out if I need
> to order some additional bolts from Sheldon).
>
There are both #86 and #87 triple bolt sets with different spacers,
12.5mm sleeve IIRC.
--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971
|
| | |
Date: 24 May 2007 14:01:32
From: still me
Subject: Re: TA Cyclo Triple bolts ?
|
On Thu, 24 May 2007 00:40:04 -0500, A Muzi <am@yellowjersey.org >
wrote:
>still me wrote:
>> How long are the TA cyclo-ish triple bolts (actually, the sleeves)
>> from inner shoulder to end? Do they normally come up flush with the
>> face of the middle chainwheel when assembled with spacers?
>>
>> I have an "interesting" existing TA setup and I am trying to figure
>> out if the sleeves used are triples (and thereby figure out if I need
>> to order some additional bolts from Sheldon).
>
>>
>There are both #86 and #87 triple bolt sets with different spacers,
>12.5mm sleeve IIRC.
Thanks.
|
|
