| |
Main
Date: 07 May 2007 23:35:42
From: Gina-Mirela Mustata
Subject: Ti frame repair, replacement frame help!!! Also - Airborne/Flyte
|
Hi,
I just found out the junction of top/down tubes with the bb shell on my
frame is cracked 90% through. I was wondering if anyone knows if this can
be welded together (safely since I race) or whether the frame should now
be scrapped? If there is no hope can I get some recommendations of
good/stiff frames (that are also reasonably priced - in college here) that
would ride similarly to Airborne/Flyte? This bike is a 2005 Zeppelin and
I was wondering if anyone knew anything about the company? I tried their
website and then found out through another newsgroup that they went
belly-up. Does that basically mean that their lifetime warranty is now
void or is there something I can do about it? Even a partial monetary
replacement would help. How does warranty work with a bankruptcy case?
Thank you for any and all help.
|
|
| |
Date: 08 May 2007 17:52:24
From: Friday
Subject: Re: Ti frame repair, replacement frame help!!! Also - Airborne/Flyte
|
Gina-Mirela Mustata wrote:
> Hi,
>
> I just found out the junction of top/down tubes with the bb shell on my
> frame is cracked 90% through. I was wondering if anyone knows if this can
> be welded together (safely since I race) or whether the frame should now
> be scrapped? If there is no hope can I get some recommendations of
> good/stiff frames (that are also reasonably priced - in college here) that
> would ride similarly to Airborne/Flyte? This bike is a 2005 Zeppelin and
> I was wondering if anyone knew anything about the company? I tried their
> website and then found out through another newsgroup that they went
> belly-up. Does that basically mean that their lifetime warranty is now
> void or is there something I can do about it? Even a partial monetary
> replacement would help. How does warranty work with a bankruptcy case?
>
> Thank you for any and all help.
>
Airborne got their frames made by Xcad.
Friday
|
| |
Date: 08 May 2007 11:41:20
From: David L. Johnson
Subject: Re: Ti frame repair, replacement frame help!!! Also - Airborne/Flyte
|
Gina-Mirela Mustata wrote:
> Hi,
>
> I just found out the junction of top/down tubes with the bb shell on my
> frame is cracked 90% through. I was wondering if anyone knows if this can
> be welded together (safely since I race) or whether the frame should now
> be scrapped? If there is no hope can I get some recommendations of
> good/stiff frames (that are also reasonably priced - in college here) that
> would ride similarly to Airborne/Flyte?
Sorry about your broken frame, but I think that you are SOL on warrantee
repair. If you are looking for a good, strong, stiff ti frame check out
Habanero, http://www.habcycles.com -- and tell Mark you got the pointer
here in r.b.t.
--
David L. Johnson
"A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines." --Ralph Waldo Emerson
|
| |
Date: 08 May 2007 10:11:50
From: mrbubl
Subject: Re: Ti frame repair, replacement frame help!!! Also - Airborne/Flyte
|
Gina-Mirela Mustata wrote:
> Hi,
>
> I just found out the junction of top/down tubes with the bb shell on my
> frame is cracked 90% through. I was wondering if anyone knows if this can
> be welded together (safely since I race) or whether the frame should now
> be scrapped? If there is no hope can I get some recommendations of
> good/stiff frames (that are also reasonably priced - in college here) that
> would ride similarly to Airborne/Flyte? This bike is a 2005 Zeppelin and
> I was wondering if anyone knew anything about the company? I tried their
> website and then found out through another newsgroup that they went
> belly-up. Does that basically mean that their lifetime warranty is now
> void or is there something I can do about it? Even a partial monetary
> replacement would help. How does warranty work with a bankruptcy case?
>
> Thank you for any and all help.
>
check in your area for someone that does aircraft repair, 2nd choice
would be welding supply, they can tell you who is buying the stuff that
can weld Ti. I had a frame repaired by a welding shop locally and the
weld looked and performed as new. It cost about $50.
|
| |
Date: 08 May 2007 00:01:04
From: Carl Sundquist
Subject: Re: Ti frame repair, replacement frame help!!! Also - Airborne/Flyte info?
|
"Gina-Mirela Mustata" <mirela@physics.purdue.edu > wrote in message
news:Pine.BSF.4.44.0705072330260.59868-100000@bohr.physics.purdue.edu...
> Hi,
>
> I just found out the junction of top/down tubes with the bb shell on my
> frame is cracked 90% through. I was wondering if anyone knows if this can
> be welded together (safely since I race) or whether the frame should now
> be scrapped? If there is no hope can I get some recommendations of
> good/stiff frames (that are also reasonably priced - in college here) that
> would ride similarly to Airborne/Flyte? This bike is a 2005 Zeppelin and
> I was wondering if anyone knew anything about the company? I tried their
> website and then found out through another newsgroup that they went
> belly-up. Does that basically mean that their lifetime warranty is now
> void or is there something I can do about it? Even a partial monetary
> replacement would help. How does warranty work with a bankruptcy case?
>
> Thank you for any and all help.
Roark is a Ti builder nearby. http://www.roarkcycles.com/
You may want to contact them for advice/recommendations of someone
relatively local who can help you.
Warranty in a bankruptcy case often puts you far down the line of creditors.
Good luck.
|
| |
Date: 07 May 2007 23:50:31
From: A Muzi
Subject: Re: Ti frame repair, replacement frame help!!! Also - Airborne/Flyte
|
Gina-Mirela Mustata wrote:
> I just found out the junction of top/down tubes with the bb shell on my
> frame is cracked 90% through. I was wondering if anyone knows if this can
> be welded together (safely since I race) or whether the frame should now
> be scrapped? If there is no hope can I get some recommendations of
> good/stiff frames (that are also reasonably priced - in college here) that
> would ride similarly to Airborne/Flyte? This bike is a 2005 Zeppelin and
> I was wondering if anyone knew anything about the company? I tried their
> website and then found out through another newsgroup that they went
> belly-up. Does that basically mean that their lifetime warranty is now
> void or is there something I can do about it? Even a partial monetary
> replacement would help. How does warranty work with a bankruptcy case?
Warranties are 'lifetime'; theirs, not yours usually. Do they have a
surviving entity? If so, maybe.
This is Ti? A customer showed us a cracked Ti frame which he had
rewelded by an Air Force tech at a local base. That's a rare success story.
If aluminum, repairs exceed value; replace it.
--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971
|
|
